Triger Godox XT-32 Canon

The semi upright XT32 transmitter case houses 2 regular AA batteries.

And an AF assist light is now available when the transmitter is used on the corresponding Canon and Nikon camera hotshoes.

The XT32 are directly compatible with all of the new generation of Godox strobes providing 2.4GHz X system radio receivers built inside.

(Though they are ideally suited to the strobes only providing remote manual and HSS, as the XT32 do not provide any TTL functions).

As well as being compatible with the previous remote manual and HSS enabled Godox strobes which accept the XTR-16 and XTR-16s clip on radio receiver units.

The XT32 transmitter also provides the corresponding 16 Groups ( A – F & 0 – 9), and 32 Channels.

GODOX XT32 FEATURES

• Godox 2.4GHz X Radio System
• Range – 100m +

• Flash Modes –  Manual / OFF
• HSS to 1/8000th
• Second Curtain Sync (When Set Via the Camera)
• Manual Flash – 1/128 – 1/1 Output (1/3rd Increments)
• 6 Modes of Power Adjustment

• 16 Groups – A / B / C / D / E / F and 0 – 9
• 32 Channels

• Large LCD Display

• HSS Delay Setting – 0~10ms, (100us Increments)
• Modeling Lamp Control
• Sound Prompt Control
• Lock Function
• Sleep Function
• Battery Level Indicator
• Auto Memory Function

• AF Assist Light (With On/Off Switch)
• Micro USB Port for Firmware Upgrade
• PC Sync Port (Input & Output)

The XT32 feature a large clear LCD screen which displays just one groups power setting at a time.

5 clearly marked menu buttons provide a dual function each, one function on short press, and another when held down.

Located on the let side is a PC Sync port (input from a camera), and micro USB port for firmware updates.

And on the right side, the main On – Off switch, and AF assist light On – Off switch.

 GODOX XT32 COMPATIBLE CAMERAS

 GODOX XT32 SPECS